Electrofusion Scraper Tools
.jpg)
-Mechanically Operated
-Easy to use
-Removes Pipe Oxidation Layer
-Pressure Sensitive Cutter
-Size Range-1/2" to 28" IPS
|
Electrofusion Scraper Tools
-Mechanically Operated -Easy to use -Removes Pipe Oxidation Layer -Pressure Sensitive Cutter -Size Range-1/2" to 28" IPS
|
HDPE Pipe Scraper Tools
| HDPE pipe forms an oxidation layer on the outside of the pipe as a
result of exposure to atmospheric agents and UV radiation. The
preparation of the pipe surface, known as scraping, eliminates this
oxidation film. which must be removed in order to have the proper melt flow and to perform a
proper electrofusion joint. This process may be accomplished with
a manual scraper tool (pipe scraper). However, the process is much
quicker and easier with the use of a mechanical scraper tool. The
tools are set up to self advance on the pipe as the operator moves the
handle around the pipe. The mechanical scraper tools contain a
pressure sensitive spring loaded cutter, which can adjust for any
abnormalities in the pipe. Integrifuse Scraper Tools-these scrapers are ideal for gas and water utility work. The scrapers can scraper both the pipe ends for couplers and the middle of the pipe for taping tees and branch saddles. Integrifuse Scraper Sizes- 1 1/4" to 2", 3 to 5", 6" to 8", and 10" to 12".
RTC Scraper Tools
Replacement blade kits are available for all models
|
RTC 160-2" IPS to 6" IPS
RTC 315-3" IPS to 12" IPS
RTC 710-14" IPS to 28" IPS